Copyright©2017 Lumiever,. All Rights Reserved.版权所有：北京易达测量技术有限公司 中企动力技术支持 京ICP备13048182号-2
PRODUCTS CENTER
24-hour free advice hotline
010-53670969
18610068622
SPECT Quality control mold body
SPECT lead gate module meets the relevant requirements of test specification 4.2.
★It is a capillary glass tube with a diameter of 1mm and a diameter of 1.8mm
★It includes a point source adapter to facilitate users to measure and locate.
★The intrinsic spatial resolution of the measurable SPECT
★The slit width is 1.0mm;
★The distance between the joints is 30mm and the thickness of lead is 3mm.
★The system plane sensitivity of SPECT can be measured.
★Inside thick 10mm, shape size: (170*170) mm;
SPECT inherent spatial resolution module meets the relevant requirements of test specification 4.1.
Follow the recommended design of IEC and NEMA to meet the requirements of the Ministry of health's "single photon emission tomography (SPECT) quality control testing specification".
SPECT surface source phantom compliance requirements 4.6.
The SPECT dual line source module meets the relevant requirements of test specification 4.7.
★The system spatial resolution of the measurable SPECT
★The inner diameter of the source line is 1mm, the line center spacing is 100mm, and the replaceable
type has no pollution to the source rack.
★The thickness of the plexiglass plate is 10mm.