Copyright©2017 Lumiever,. All Rights Reserved.版权所有:北京易达测量技术有限公司 中企动力技术支持 京ICP备13048182号-2
PRODUCTS CENTER
24-hour free advice hotline
010-53670969
18610068622
Radiotherapy one-dimensional water tank
This product is a standard water model for absolute dose test. It is usually used to measure absolute dose with various dosimeters. It is suitable for monitoring and calibration of high energy photon and electron beam ionization chamber in water; the ionization chamber is inserted through the level of porous organic glass on the wall surface; the measurement position is located at 150mm below the upper wall surface, and the water level can be adjusted by the wall scale scale to control the measurement depth.
Technical parameters:
1. size: 30cm X 30cm X 37cm;
2. the water tank is equipped with a balance waterproof cap suitable for 0.6cc ionization chamber.
3. water model body wall has red water depth scale.
4. the bottom 4 supporting feet are equipped with a knob type horizontal adjustment device.
The 5. floor and each side board are marked with the opposite datum line.
6. water mold is equipped with a draining water faucet.